NHP Power System LLP
- Home
- »
- Our Products
- »
- Our Products
Switch Mode Power Supply SMPS - PES Series
The PES series is one of the latest entrants from NHP Power system in its line of state of the art power supplies made from UL94 V-0 approved raw material. It functions from a wide AC input range and at the same time accepts DC input voltage. Its main features are low no-load power consumption, high efficiency and high reliability. These power supply offer excellent EMC performance and meet international standards
NHP-PES-24 (SMPS 12V 2A) AC/DC Switch Mode Power Supply
Product Details:
| Voltage | 30 V |
| Output Current | 2A |
| Output Voltage | 12V |
| Current | 25A |
| Usage/Application | Industrial Automation |
| Design | Smps |
| Display Type | Digital |
| Country of Origin | Made in India |
•90 - 300V Universal AC or wide 130 - 400V DC Input
•Operating ambient temperature range: -40Deg C to +85Deg C
•High I/O isolation test voltage up to 3000VAC
•Regulated output, low ripple & noise
•Output short circuit, over-current protection
•High efficiency, high reliability
Input Specifications: | |
Input Voltage | 90 to 300V AC |
Input Voltage Frequency | 40Hz to 70Hz |
Input Current | 0.25A Typical at 230V AC |
Input Inrush Current | Limited by NTC Thermistor to 35A |
Leakage current | <2 mA at 230V AC |
Output Specifications: | |
Output voltage Accuracy | At full load range ±1 % |
Line Regulation | <1% |
Load Regulation | <1% |
Ripple and noise | 150 mv p-p |
Temperature Coefficient | ±0.02%/Deg C |
Hold-up Time 230V AC | 20ms |
Protections: | |
Input under voltage | Cut-off level 140V AC; Turn on voltage 160V AC |
Input over voltage | 310V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC |
Output short circuit and overload | Continuously Protected |
General Specifications: | |
Operating Temperature | -20 to 85 Deg C |
Storage Temperature | -20 to 85 Deg C |
Operating Humidity | 20 to 95%RH |
Storage Humidity | 10 to 95%RH |
Vibration | 10-500 Hz 2G 10 min/cycle 60 mins each along XYZ axis |
Indication | Mains On |
PLEASE REFER TO DATASHEET FOR FURTHER DETAILS.
Callback
NHP-PES-24 (SMPS 5V 3A) AC/DC Switch Mode Power Supply
Product Details:
| Voltage | 30 V |
| Output Current | 3A |
| Output Voltage | 5V |
| Usage/Application | Industrial Automation |
| Current | 30A |
| Design | Smps |
| Display Type | Digital |
| Country of Origin | Made in India |
•90 - 300V Universal AC or wide 130 - 400V DC Input
•Operating ambient temperature range: -40Deg C to +85Deg C
•High I/O isolation test voltage up to 3000VAC
•Regulated output, low ripple & noise
•Output short circuit, over-current protection
•High efficiency, high reliability
Input Specifications: | |
Input Voltage | 90 to 300V AC |
Input Voltage Frequency | 40Hz to 70Hz |
Input Current | 0.25A Typical at 230V AC |
Input Inrush Current | Limited by NTC Thermistor to 35A |
Leakage current | <2 mA at 230V AC |
Output Specifications: | |
Output voltage Accuracy | At full load range ±1 % |
Line Regulation | <1% |
Load Regulation | <1% |
Ripple and noise | 150 mv p-p |
Temperature Coefficient | ±0.02%/Deg C |
Hold-up Time 230V AC | 20ms |
Protections: | |
Input under voltage | Cut-off level 140V AC; Turn on voltage 160V AC |
Input over voltage | 310V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC |
Output short circuit and overload | Continuously Protected |
General Specifications: | |
Operating Temperature | -20 to 85 Deg C |
Storage Temperature | -20 to 85 Deg C |
Operating Humidity | 20 to 95%RH |
Storage Humidity | 10 to 95%RH |
Vibration | 10-500 Hz 2G 10 min/cycle 60 mins each along XYZ axis |
Indication | Mains On |
PLEASE REFER TO DATASHEET FOR FURTHER DETAILS.
Callback
NHP-PES-24 (SMPS 24V 1A) AC/DC Switch Mode Power Supply
Product Details:
| Voltage | 24 V |
| Output Voltage | 5V |
| Output Current | 1A |
| Current | 25A |
| Usage/Application | Industrial Automation |
| Design | Smps |
| Display Type | Digital |
| Country of Origin | Made in India |
•90 - 300v universal ac or wide 130 - 400v dc input
•operating ambient temperature range: -40deg c to +85deg c
•high i/o isolation test voltage up to 3000vac
•regulated output, low ripple & noise
•output short circuit, over-current protection
•high efficiency, high reliability
input specifications: | |
input voltage | 90 to 300v ac |
input voltage frequency | 40hz to 70hz |
input current | 0. 25a typical at 230v ac |
input inrush current | limited by ntc thermistor to 35a |
leakage current | <2 ma at 230v ac |
output specifications: | |
output voltage accuracy | at full load range ±1 % |
line regulation | <1% |
load regulation | <1% |
ripple and noise | 150 mv p-p |
temperature coefficient | ±0. 02%/deg c |
hold-up time 230v ac | 20ms |
protections: | |
input under voltage | cut-off level 140v ac; turn on voltage 160v ac |
input over voltage | 310v ac units shuts off if voltage goes above this value and automatic restart when input is less than 275v ac |
output short circuit and overload | continuously protected |
general specifications: | |
operating temperature | -20 to 85 deg c |
storage temperature | -20 to 85 deg c |
operating humidity | 20 to 95%rh |
storage humidity | 10 to 95%rh |
vibration | 10-500 hz 2g 10 min/cycle 60 mins each along xyz axis |
indication | mains on |
please refer to datasheet for further details.
Callback
NHP-PES-35 (SMPS 24V 1.5A) AC/DC Switch Mode Power Supply
Product Details:
| Output Current | 1.5A |
| Current | 25A |
| Usage/Application | Industrial Automation |
| Design | Smps |
| Country of Origin | Made in India |
| Voltage | 40 V |
| Output Voltage | 24V |
•input 170v to 270v ac operating range
•operating temperature -20 to 85 deg c
•low standby power consumption and high efficiency
•input over and under voltage protections
•led indicator for power on
•output short circuit, over-load, over-voltage protection
•leading supplier for major oe manufactures for 25 years
•all our products come with a 1-year warranty against all manufacturing defects
|
input specifications: |
|
|
input voltage |
170 to 270v ac |
|
input voltage frequency |
47hz to 63hz |
|
input current |
1a typical at 230v ac |
|
input inrush current |
limited by ntc thermistor to 35a |
|
leakage current |
<0. 75 ma at 230v ac |
|
output specifications: |
|
|
output voltage accuracy |
at full load range ±1 % |
|
line regulation |
<1% |
|
load regulation |
<1% |
|
ripple and noise |
150 mv p-p |
|
temperature coefficient |
±0. 03%/deg c |
|
hold-up time 230v ac |
20ms |
|
protections: |
|
|
input under voltage |
cut-off level 140v ac; turn on voltage 160v ac |
|
input over voltage |
310v ac units shuts off if voltage goes above this value and automatic restart when input is less than 275v ac |
|
output short circuit and overload |
continuously protected |
|
general specifications: |
|
|
operating temperature |
-20 to 85 deg c |
|
storage temperature |
-20 to 85 deg c |
|
operating humidity |
20 to 95%rh |
|
storage humidity |
10 to 95%rh |
|
vibration |
10-500 hz 2g 10 min/cycle 60 mins each along xyz axis |
|
indication |
mains on |
please refer to datasheet for further details.
Callback
NHP-PES-35 (SMPS 12V 3A) AC/DC Switch Mode Power Supply
Product Details:
| Voltage | 30 V |
| Output Voltage | 12V |
| Output Current | 3A |
| Usage/Application | Industrial Automation |
| Current | 30A |
| Design | Smps |
| Country of Origin | Made in India |
•Input 170V to 270V AC operating range
•Operating Temperature -20 to 85 Deg C
•Low Standby Power Consumption and High Efficiency
•Input over and under voltage protections
•LED indicator for power on
•Output short circuit, over-load, over-voltage protection
•Leading supplier for major OE manufactures for 25 years
•All our products come with a 1-year warranty against all manufacturing defects
|
Input Specifications: |
|
|
Input Voltage |
170 to 270V AC |
|
Input Voltage Frequency |
47Hz to 63Hz |
|
Input Current |
1A Typical at 230V AC |
|
Input Inrush Current |
Limited by NTC Thermistor to 35A |
|
Leakage current |
<0.75 mA at 230V AC |
|
Output Specifications: |
|
|
Output voltage Accuracy |
At full load range ±1 % |
|
Line Regulation |
<1% |
|
Load Regulation |
<1% |
|
Ripple and noise |
150 mv p-p |
|
Temperature Coefficient |
±0.03%/Deg C |
|
Hold-up Time 230V AC |
20ms |
|
Protections: |
|
|
Input under voltage |
Cut-off level 140V AC; Turn on voltage 160V AC |
|
Input over voltage |
310V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC |
|
Output short circuit and overload |
Continuously Protected |
|
General Specifications: |
|
|
Operating Temperature |
-20 to 85 Deg C |
|
Storage Temperature |
-20 to 85 Deg C |
|
Operating Humidity |
20 to 95%RH |
|
Storage Humidity |
10 to 95%RH |
|
Vibration |
10-500 Hz 2G 10 min/cycle 60 mins each along XYZ axis |
|
Indication |
Mains On |
PLEASE REFER TO DATASHEET FOR FURTHER DETAILS.
Callback
NHP-PES-100 (SMPS 24V 4A) AC/DC Switch Mode Power Supply
Product Details:
| Output Voltage | 24V |
| Output Current | 4A |
| Usage/Application | Industrial Automation |
| Design | Smps |
| Display Type | Digital |
| Warranty | No |
| Country of Origin | Made in India |
•Input 170V to 270V AC operating range
•Operating Temperature -20 to 85 Deg C
•Low Standby Power Consumption and High Efficiency
•Input over and under voltage protections
•LED indicator for power on
•Output short circuit, over-load, over-voltage protection
•Leading supplier for major OE manufactures for 25 years
•All our products come with a 1-year warranty against all manufacturing defects
|
Input Specifications: |
|
|
Input Voltage |
170 to 270V AC |
|
Input Voltage Frequency |
47Hz to 63Hz |
|
Input Current |
1A Typical at 230V AC |
|
Input Inrush Current |
Limited by NTC Thermistor to 35A |
|
Leakage current |
<0.75 mA at 230V AC |
|
Output Specifications: |
|
|
Output voltage Accuracy |
At full load range ±1 % |
|
Line Regulation |
<1% |
|
Load Regulation |
<1% |
|
Ripple and noise |
150 mv p-p |
|
Temperature Coefficient |
±0.03%/Deg C |
|
Hold-up Time 230V AC |
20ms |
|
Protections: |
|
|
Input under voltage |
Cut-off level 140V AC; Turn on voltage 160V AC |
|
Input over voltage |
310V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC |
|
Output short circuit and overload |
Continuously Protected |
|
General Specifications: |
|
|
Operating Temperature |
-20 to 85 Deg C |
|
Storage Temperature |
-20 to 85 Deg C |
|
Operating Humidity |
20 to 95%RH |
|
Storage Humidity |
10 to 95%RH |
|
Vibration |
10-500 Hz 2G 10 min/cycle 60 mins each along XYZ axis |
|
Indication |
Mains On |
PLEASE REFER TO DATASHEET FOR FURTHER DETAILS.
Callback
NHP-PES-72 (SMPS 24V 3A) AC/DC Switch Mode Power Supply
Product Details:
| Output Current | 3A |
| Current | 25A |
| Usage/Application | Industrial Automation |
| Design | Smps |
| Country of Origin | Made in India |
| Voltage | 30 V |
| Output Voltage | 24V |
•Input 170V to 270V AC operating range
•Operating Temperature -20 to 85 Deg C
•Low Standby Power Consumption and High Efficiency
•Input over and under voltage protections
•LED indicator for power on
•Output short circuit, over-load, over-voltage protection
•Leading supplier for major OE manufactures for 25 years
•All our products come with a 1-year warranty against all manufacturing defects
Input Specifications: | |
Input Voltage | 170 to 270V AC |
Input Voltage Frequency | 47Hz to 63Hz |
Input Current | 1A Typical at 230V AC |
Input Inrush Current | Limited by NTC Thermistor to 35A |
Leakage current | <0.75 mA at 230V AC |
Output Specifications: | |
Output voltage Accuracy | At full load range ±1 % |
Line Regulation | <1% |
Load Regulation | <1% |
Ripple and noise | 150 mv p-p |
Temperature Coefficient | ±0.03%/Deg C |
Hold-up Time 230V AC | 20ms |
Protections: | |
Input under voltage | Cut-off level 140V AC; Turn on voltage 160V AC |
Input over voltage | 310V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC |
Output short circuit and overload | Continuously Protected |
General Specifications: | |
Operating Temperature | -20 to 85 Deg C |
Storage Temperature | -20 to 85 Deg C |
Operating Humidity | 20 to 95%RH |
Storage Humidity | 10 to 95%RH |
Vibration | 10-500 Hz 2G 10 min/cycle 60 mins each along XYZ axis |
Indication | Mains On |
PLEASE REFER TO DATASHEET FOR FURTHER DETAILS.
Callback
NHP-PES-72 (SMPS 12V 5A) AC/DC Switch Mode Power Supply
Product Details:
| Output Voltage | 12V |
| Usage/Application | Industrial Automation |
| Design | Smps |
| Display Type | Digital |
| Output Current | 5A |
| Warranty | No |
| Country of Origin | Made in India |
•input 170v to 270v ac operating range
•operating temperature -20 to 85 deg c
•low standby power consumption and high efficiency
•input over and under voltage protections
•led indicator for power on
•output short circuit, over-load, over-voltage protection
•leading supplier for major oe manufactures for 25 years
•all our products come with a 1-year warranty against all manufacturing defects
|
input specifications: |
|
|
input voltage |
170 to 270v ac |
|
input voltage frequency |
47hz to 63hz |
|
input current |
1a typical at 230v ac |
|
input inrush current |
limited by ntc thermistor to 35a |
|
leakage current |
<0. 75 ma at 230v ac |
|
output specifications: |
|
|
output voltage accuracy |
at full load range ±1 % |
|
line regulation |
<1% |
|
load regulation |
<1% |
|
ripple and noise |
150 mv p-p |
|
temperature coefficient |
±0. 03%/deg c |
|
hold-up time 230v ac |
20ms |
|
protections: |
|
|
input under voltage |
cut-off level 140v ac; turn on voltage 160v ac |
|
input over voltage |
310v ac units shuts off if voltage goes above this value and automatic restart when input is less than 275v ac |
|
output short circuit and overload |
continuously protected |
|
general specifications: |
|
|
operating temperature |
-20 to 85 deg c |
|
storage temperature |
-20 to 85 deg c |
|
operating humidity |
20 to 95%rh |
|
storage humidity |
10 to 95%rh |
|
vibration |
10-500 hz 2g 10 min/cycle 60 mins each along xyz axis |
|
indication |
mains on |
please refer to datasheet for further details.
Callback
NHP-PES-125 (SMPS 24V 5A) AC/DC Switch Mode Power Supply
Product Details:
| Voltage | 24 V |
| Output Voltage | 24V |
| Output Current | 5A |
| Usage/Application | Industrial Automation |
| Current | 25A |
| Brand | APC |
| Design | Smps |
| Display Type | Digital |
| Country of Origin | Made in India |
•input 170v to 270v ac operating range
•operating temperature -20 to 85 deg c
•low standby power consumption and high efficiency
•input over and under voltage protections
•led indicator for power on
•output short circuit, over-load, over-voltage protection
•leading supplier for major oe manufactures for 25 years
•all our products come with a 1-year warranty against all manufacturing defects
|
input specifications: |
|
|
input voltage |
170 to 270v ac |
|
input voltage frequency |
47hz to 63hz |
|
input current |
1a typical at 230v ac |
|
input inrush current |
limited by ntc thermistor to 35a |
|
leakage current |
<0. 75 ma at 230v ac |
|
output specifications: |
|
|
output voltage accuracy |
at full load range ±1 % |
|
line regulation |
<1% |
|
load regulation |
<1% |
|
ripple and noise |
150 mv p-p |
|
temperature coefficient |
±0. 03%/deg c |
|
hold-up time 230v ac |
20ms |
|
protections: |
|
|
input under voltage |
cut-off level 140v ac; turn on voltage 160v ac |
|
input over voltage |
310v ac units shuts off if voltage goes above this value and automatic restart when input is less than 275v ac |
|
output short circuit and overload |
continuously protected |
|
general specifications: |
|
|
operating temperature |
-20 to 85 deg c |
|
storage temperature |
-20 to 85 deg c |
|
operating humidity |
20 to 95%rh |
|
storage humidity |
10 to 95%rh |
|
vibration |
10-500 hz 2g 10 min/cycle 60 mins each along xyz axis |
|
indication |
mains on |
please refer to datasheet for further details.
Callback
NHP-PES-72 (SMPS 5V 6.5A) AC/DC Switch Mode Power Supply
Product Details:
| Voltage | 24 V |
| Output Current | 6.5A |
| Output Voltage | 5V |
| Usage/Application | Industrial Automation |
| Current | 25A |
| Design | Smps |
| Country of Origin | Made in India |
•Input 170V to 270V AC operating range
•Operating Temperature -20 to 85 Deg C
•Low Standby Power Consumption and High Efficiency
•Input over and under voltage protections
•LED indicator for power on
•Output short circuit, over-load, over-voltage protection
•Leading supplier for major OE manufactures for 25 years
•All our products come with a 1-year warranty against all manufacturing defects
|
Input Specifications: |
|
|
Input Voltage |
170 to 270V AC |
|
Input Voltage Frequency |
47Hz to 63Hz |
|
Input Current |
1A Typical at 230V AC |
|
Input Inrush Current |
Limited by NTC Thermistor to 35A |
|
Leakage current |
<0.75 mA at 230V AC |
|
Output Specifications: |
|
|
Output voltage Accuracy |
At full load range ±1 % |
|
Line Regulation |
<1% |
|
Load Regulation |
<1% |
|
Ripple and noise |
150 mv p-p |
|
Temperature Coefficient |
±0.03%/Deg C |
|
Hold-up Time 230V AC |
20ms |
|
Protections: |
|
|
Input under voltage |
Cut-off level 140V AC; Turn on voltage 160V AC |
|
Input over voltage |
310V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC |
|
Output short circuit and overload |
Continuously Protected |
|
General Specifications: |
|
|
Operating Temperature |
-20 to 85 Deg C |
|
Storage Temperature |
-20 to 85 Deg C |
|
Operating Humidity |
20 to 95%RH |
|
Storage Humidity |
10 to 95%RH |
|
Vibration |
10-500 Hz 2G 10 min/cycle 60 mins each along XYZ axis |
|
Indication |
Mains On |
PLEASE REFER TO DATASHEET FOR FURTHER DETAILS.
Callback
NHP House, Plot No. 8
Pune - 411013, Maharashtra, India