NHP Power System LLP
NHP Power System LLP
Pune, Maharashtra
GST No. 27AAKFN4046M1ZU
TrustSEAL Verified
Call 08046035099 68% Response Rate
SEND EMAIL

Battery Charger - Single Phase

Pioneers in the industry, we offer nhp 24v 10a battery charger, nhp 24v 5a battery charger, bc 12v 6a battery charger, nhp 24v 20a battery charger, nhp 24v 15a battery charger and nhp 24v 2.5a battery charger from India.

NHP 24V 10A Battery Charger

NHP 24V 10A Battery Charger
  • NHP 24V 10A Battery Charger
  • NHP 24V 10A Battery Charger
  • NHP 24V 10A Battery Charger
Get Best Quote
Approx. Price: Rs 1,800 / UnitGet Latest Price
Product Brochure

Product Details:

BrandSirius
Output VoltageFloat: 26.2V DC - 26.5V DC; Boost: 27.8V DC - 28.4V DC
Country of OriginMade in India
Input Voltage170-270V AC
Output CurrentFloat: 0A - 3A; Boost: 3A - 10A
Current5 A

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Forced Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 2.6A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <3.5 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 10 amps
Charging current in float mode 0 amps to 3 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 250 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 29V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback


Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: Individual Corrugated Box
Yes! I am interested

NHP 24V 5A Battery Charger

NHP 24V 5A Battery Charger
  • NHP 24V 5A Battery Charger
  • NHP 24V 5A Battery Charger
  • NHP 24V 5A Battery Charger
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price
Product Brochure

Product Details:

BrandSirius
Maximum Output Current270V AC
Country of OriginMade in India
Input Voltage Range170 to 270V AC
Output Current5A
Output VoltageFloat Mode: 26.2V to 26.5V DC Boost Mode: 27.8V to 28.4V DC
Voltage36V

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 5 amps
Charging current in float mode 0 amps to 3 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 29V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback
Yes! I am interested

BC 12V 6A Battery Charger

BC 12V 6A Battery Charger
  • BC 12V 6A Battery Charger
  • BC 12V 6A Battery Charger
  • BC 12V 6A Battery Charger
Get Best Quote
Approx. Price: Rs 1,050 / unitGet Latest Price
Product Brochure

Product Details:

Battery TypeLead Acid/VRLA SMF Battery Charger
BrandNHP Power Systems
ColorWhite
Country of OriginMade in India
Charging Current In Boost Mode6amps
Charging Current In Float Mode0 to 3amps
Input Voltage170-270V AC

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. Battery charger for charging Lead Acid battery for Engine-start applications: Input Range 170V to 270V operating range Naturally Air cooledOperating Temperature -20 to 85 Deg CLow Standby Power Consumption and High Efficiency  High Input Output isolation 3000V AC and High surge immunity Input over and under voltage protectionsOutput short circuit, over-load, over-voltage protectionCharges battery from zero volts Draws zero current from the batteryLeading supplier for major OE manufactures for 25 yearsAll our products come with a 1-year warranty against all manufacturing defects    Input Specifications:Input Voltage170V - 270V ACInput Voltage Frequency40Hz to 65HzInput Current1A Typical at 230V ACInput Inrush CurrentLimited by NTC Thermistor to 35ALeakage current<2 mA at 230V ACOutput Specifications:Output voltage:Float Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DCCharging current in boost mode6 ampsCharging current in float mode0 amps to 3 ampsLine Regulation<1%Load Regulation<1%Ripple and noise150 mv p-pStand-by Power Consumption3WProtections:Input under voltageCutoff level 140V AC; Turn on voltage 160V ACInput over voltage320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V ACOutput over voltage (Battery charger included)15V DCOutput short circuit and overloadContinuously ProtectedBattery reverse polarityProtectedCurrent drawn by charger from batteryDraws zero current from the battery under any circumstancesExternally Induced Over voltageProtected against output over-voltage caused by parallel connection of alternator, etc.AnnunciationPotential free NO/NC contact for charger ON/Fail indication
Request
Callback
Yes! I am interested

NHP 24V 20A Battery Charger

NHP 24V 20A Battery Charger
  • NHP 24V 20A Battery Charger
  • NHP 24V 20A Battery Charger
  • NHP 24V 20A Battery Charger
Get Best Quote
Approx. Price: Rs 4,000 / PieceGet Latest Price
Product Brochure

Product Details:

Battery TypeLead Acid/VRLA SMF Battery Charger
BrandSirius
ColorGrey
Output VoltageFloat Mode: 26.2V to 26.5V DC Boost Mode: 27.8V to 28.4V DC
Country of OriginMade in India
Output Current20A
Input Voltage170 to 270V AC

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Forced Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 2.6A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <3.5 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 20 amps
Charging current in float mode 0 amps to 8 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 250 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 29V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback
Yes! I am interested

NHP 24V 15A Battery Charger

NHP 24V 15A Battery Charger
  • NHP 24V 15A Battery Charger
  • NHP 24V 15A Battery Charger
  • NHP 24V 15A Battery Charger
Get Best Quote
Approx. Price: Rs 3,500 / PieceGet Latest Price
Product Brochure

Product Details:

Voltage24V
BrandSirius
Maximum Output Current270V AC
Output VoltageFloat Mode: 26.2V to 26.5V DC Boost Mode: 27.8V to 28.4V DC
Country of OriginMade in India
Input Voltage170V to 270V AC
Output Current15A

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Forced Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 2.6A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <3.5 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 15 amps
Charging current in float mode 0 amps to 5 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 250 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 29V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback
Yes! I am interested

NHP 24V 2.5A Battery Charger

NHP 24V 2.5A  Battery Charger
  • NHP 24V 2.5A  Battery Charger
  • NHP 24V 2.5A  Battery Charger
  • NHP 24V 2.5A  Battery Charger
  • NHP 24V 2.5A  Battery Charger
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price
Product Brochure

Product Details:

BrandSirius
Maximum Input Current270V AC
Country of OriginMade in India
Input Voltage100 to 270V AC
Output Current2.5A
Output Voltage28.2VDC to 27.8VDC
Voltage36V

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 100V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

 

Input Specifications:
Input Voltage 100V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: 27.8V to 28.2V DC
Charging current  2.5 amps

Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 90V AC; Turn on voltage 100V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 290V AC
Output over voltage (Battery charger included) 29V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Charger ON/Fail indication
Request
Callback


Additional Information:

  • Production Capacity: 1000 units
  • Delivery Time: immediate
Yes! I am interested

NHP 12V 5A Battery Charger

NHP 12V 5A Battery Charger
  • NHP 12V 5A Battery Charger
  • NHP 12V 5A Battery Charger
  • NHP 12V 5A Battery Charger
  • NHP 12V 5A Battery Charger
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price
Product Brochure

Product Details:

Voltage12V
Maximum Output Current5A
Output Float Current170 to 270V AC
Country of OriginMade in India
Output Voltage13.5V to 13.8V DC
Input Voltage170 to 270V AC

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: 13.8V to 14V DC
Charging current  5 amps

Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 15V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.

Request
Callback
Yes! I am interested

NHP 24V 25A Battery Charger

NHP 24V 25A Battery Charger
  • NHP 24V 25A Battery Charger
  • NHP 24V 25A Battery Charger
  • NHP 24V 25A Battery Charger
  • NHP 24V 25A Battery Charger
  • NHP 24V 25A Battery Charger
Get Best Quote
Approx. Price: Rs 4,800 / PieceGet Latest Price
Product Brochure

Product Details:

Maximum Input Current270V AC
Maximum Output Current25A
Country of OriginMade in India
Output VoltageFloat Mode:26.2V to 26.5V DC; Boost Mode:27.8V to 28.4V DC
Input Voltage170V - 270V AC
BrandNHP Power Systems LLP
Voltage12V

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 25 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 30V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication

Request
Callback
Yes! I am interested

NHP 24V 35A Battery Charger

NHP 24V 35A Battery Charger
  • NHP 24V 35A Battery Charger
  • NHP 24V 35A Battery Charger
  • NHP 24V 35A Battery Charger
Get Best Quote
Approx. Price: Rs 9,500 / PieceGet Latest Price
Product Brochure

Product Details:

Voltage24V
Maximum Input Current270V AC
Maximum Output Current35A
Country of OriginMade in India
Input Voltage170V - 270V AC
BrandNHP Power Systems LLP
Output VoltageFloat Mode:26.2V to 26.5V DC; Boost Mode:27.8V to 28.4V DC

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:
  • Input Range 170V to 270V operating range 
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 35 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 30V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication

Request
Callback
Yes! I am interested

NHP 24V 40A Battery Charger

NHP 24V 40A Battery Charger
  • NHP 24V 40A Battery Charger
  • NHP 24V 40A Battery Charger
  • NHP 24V 40A Battery Charger
Get Best Quote
Approx. Price: Rs 9,800 / PieceGet Latest Price
Product Brochure

Product Details:

Voltage24V
Maximum Output Current40A
Output Float Current270V AC
Country of OriginMade in India
BrandNHP Power Systems LLP
Input Voltage170V - 270V AC
Output VoltageFloat Mode:26.2V to 26.5V DC; Boost Mode:27.8V to 28.4V DC

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 40 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 30V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication

Request
Callback
Yes! I am interested

NHP 12V 2A Battery Charger

NHP 12V 2A Battery Charger
  • NHP 12V 2A Battery Charger
  • NHP 12V 2A Battery Charger
  • NHP 12V 2A Battery Charger
  • NHP 12V 2A Battery Charger
Get Best Quote
Approx. Price: Rs 750 / PieceGet Latest Price
Product Brochure

Product Details:

Voltage12V
Maximum Output Current2A
Output Float Current270V AC
Country of OriginMade in India
BrandNHP Power Systems LLP
Input Voltage100V to 270V AC
Output Voltage13.5V to 13.8V DC

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 100V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 100V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: 13.5V to 13.8V DC
Charging current  2 amps

Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 90V AC; Turn on voltage 100V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 290V AC
Output over voltage (Battery charger included) 15V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Charger ON/Fail indication
Request
Callback
Yes! I am interested

NHP 12V 20A Battery Charger

NHP 12V 20A Battery Charger
  • NHP 12V 20A Battery Charger
  • NHP 12V 20A Battery Charger
  • NHP 12V 20A Battery Charger
  • NHP 12V 20A Battery Charger
Get Best Quote
Approx. Price: Rs 2,100 / PieceGet Latest Price
Product Brochure

Product Details:

Maximum Input Current270V AC
Country of OriginMade in India
Input Voltage170V to 270V AC
Output CurrentFloat Mode: 0 to 6 Amps; Boost Mode: 20 Amps
Output VoltageFloat Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
BrandNHP Power Systems LLP
Voltage24V

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Charging current in boost mode 20 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 15V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback
Yes! I am interested

NHP 12V 30A Battery Charger

NHP 12V 30A Battery Charger
  • NHP 12V 30A Battery Charger
  • NHP 12V 30A Battery Charger
  • NHP 12V 30A Battery Charger
Get Best Quote
Approx. Price: Rs 4,800 / PieceGet Latest Price
Product Brochure

Product Details:

Output DC Current270V AC
Country of OriginMade in India
Output VoltageFloat Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Input Voltage170V to 270V AC
Output CurrentFloat Mode: 0 to 6 Amps; Boost Mode: 30 Amps
BrandNHP Power Systems LLP
Voltage24V

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging all types of
Batteries:
  • Input Range 170V to 270V operating range 
  • Forced Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Charging current in boost mode 30 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 15V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback
Yes! I am interested

NHP 12V 10A Battery Charger

NHP 12V 10A Battery Charger
  • NHP 12V 10A Battery Charger
  • NHP 12V 10A Battery Charger
  • NHP 12V 10A Battery Charger
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price
Product Brochure

Product Details:

BrandNHP
Output VoltageFloat Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Input Voltage170V to 270V AC
Output CurrentFloat Mode: 0 to 3 Amps; Boost Mode: 10 Amps
Dimensions: LBH187*58*131mm
MountingWall mounting type
Cooling MethodNaturally Air Cooled

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Charging current in boost mode 10 amps
Charging current in float mode 0 amps to 3 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 15V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback


Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: Individual Corrugated Box
Yes! I am interested

NHP 12V-10A Battery Charger

NHP 12V-10A Battery Charger
  • NHP 12V-10A Battery Charger
  • NHP 12V-10A Battery Charger
  • NHP 12V-10A Battery Charger
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price
Product Brochure

Product Details:

BrandNHP
Output CurrentFloat Mode: 0 to 3 Amps; Boost Mode: 10 Amps
Input Voltage170V to 270V AC
Output VoltageFloat Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Cooling MethodNaturally Air Cooled
Dimensions: LBH187*58*131mm
MountingWall mounting type

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 13.3V to 13.5V DC; Boost Mode: 13.8V to 14V DC
Charging current in boost mode 10 amps
Charging current in float mode 0 amps to 3 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 15V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback


Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: Individual Corrugated Box
Yes! I am interested

NHP 24V 30A Battery Charger

NHP 24V 30A Battery Charger
  • NHP 24V 30A Battery Charger
  • NHP 24V 30A Battery Charger
  • NHP 24V 30A Battery Charger
Get Best Quote
Approx. Price: Rs 5,200 / PieceGet Latest Price
Product Brochure

Product Details:

Maximum Input Current270V AC
Maximum Output Current30A
Country of OriginMade in India
BrandNHP Power Systems LLP
Input Voltage170V - 270V AC
Output VoltageFloat Mode:26.2V to 26.5V DC; Boost Mode:27.8V to 28.4V DC
Voltage12V

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 1A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 30 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 150 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 30V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication

Request
Callback
Yes! I am interested

NHP 24V 30A Battery Charger

NHP 24V 30A Battery Charger
  • NHP 24V 30A Battery Charger
  • NHP 24V 30A Battery Charger
  • NHP 24V 30A Battery Charger
Get Best Quote
Approx. Price: Rs 5,200 / PieceGet Latest Price
Product Brochure

Product Details:

BrandNHP
Output Voltage24V
Output current30A
Float Current0 - 6A
Boost Current6 - 30A
CoolingForced Air
EffeciencyGreater than 85%
Load RegulationBetter than 1%
Line RegulationBetter than 1%
Vibration10-500 Hz 2G 10 min/cycle 60 mins each along X,Y,Z axis
Dimensions266*120*115mm

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Naturally Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 5A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <2 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 6 amps to 30 amps
Charging current in float mode 0 amps to 6 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 250 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 30V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback


Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: Individual Corrugated Box
Yes! I am interested

NHP 24V-10A Battery Charger

NHP 24V-10A Battery Charger
  • NHP 24V-10A Battery Charger
Get Best Quote
Approx. Price: Rs 1,800 / PieceGet Latest Price
Product Brochure

Product Details:

Battery TypeLithium Ion Battery
Output CurrentFloat Mode: 0 to 3 Amps; Boost Mode: 10 Amps
BrandNHP
Operating Temperature-20 to 85 Deg C
Input Voltage170-270V AC
Output VoltageFloat: 26.2V DC - 26.5V DC; Boost: 27.8V DC - 28.4V DC
CoolingForced Air Cooled
Dimensions190mm x 73mm x 130mm

Please drop a mail at sales(@)nhpelectronics(.)com to purchase. 

Battery charger for charging Lead Acid battery for Engine-start applications:

  • Input Range 170V to 270V operating range 
  • Forced Air cooled
  • Operating Temperature -20 to 85 Deg C
  • Low Standby Power Consumption and High Efficiency  
  • High Input Output isolation 3000V AC and High surge immunity 
  • Input over and under voltage protections
  • Output short circuit, over-load, over-voltage protection
  • Charges battery from zero volts 
  • Draws zero current from the battery
  • Leading supplier for major OE manufactures for 25 years
  • All our products come with a 1-year warranty against all manufacturing defects

   
Input Specifications:
Input Voltage 170V - 270V AC
Input Voltage Frequency 40Hz to 65Hz
Input Current 2.6A Typical at 230V AC
Input Inrush Current Limited by NTC Thermistor to 35A
Leakage current <3.5 mA at 230V AC
Output Specifications:
Output voltage: Float Mode: 26.2V to 26.5V DC; Boost Mode: 27.8V to 28.4V DC
Charging current in boost mode 10 amps
Charging current in float mode 0 amps to 3 amps
Line Regulation <1%
Load Regulation <1%
Ripple and noise 250 mv p-p
Stand-by Power Consumption 3W
Protections:
Input under voltage Cutoff level 140V AC; Turn on voltage 160V AC
Input over voltage 320V AC units shuts off if voltage goes above this value and automatic restart when input is less than 275V AC
Output over voltage (Battery charger included) 29V DC
Output short circuit and overload Continuously Protected
Battery reverse polarity Protected
Current drawn by charger from battery Draws zero current from the battery under any circumstances
Externally Induced Over voltage Protected against output over-voltage caused by parallel connection of alternator, etc.
Annunciation Potential free NO/NC contact for charger ON/Fail indication
Request
Callback


Additional Information:

  • Delivery Time: Immediate
  • Packaging Details: Individual Corrugated Box
Yes! I am interested
X

Explore More Products

View All Products
Tell Us What Are You Looking For ?




Reach Us
Fatima Mulla (Manager)
NHP Power System LLP
NHP House, Plot No. 8, Ramtekdi Industrial Estate, TP Scheme 2
Pune - 411013, Maharashtra, India
Get Directions

Call Us


Send E-mail